X758

Ride-on Mower

  • 18 kW (24 hp) 3-cyl Diesel Engine
  • Standard 122 cm (48 in.) Accel Deep™ Deck, optional 137 cm (54 in.) High-Capacity Deck or 152 cm (60 in.) High-Capacity Deck
  • Hydrostatic Transmission
  • Mow up to 2 ha (5 ac.)

Features


17.9 kW (24 hp) diesel engine 17.9 kW (24 hp) diesel engine
Diesel engine Diesel engine

A liquid-cooled, 3-cylinder diesel engine provides exceptional power, performance, fuel economy, and durability to handle commercial-use applications:

  • Large displacement provides exceptional torque
  • Cast-iron block improves noise absorption
  • Quality features include cast-iron cylinder liners, overhead valves, full-pressure lubrication, and replaceable oil filter
  • Solenoid-shift starter ensures easy starts, even in cold weather
  • High-energy glow plugs ensure quick starts in cold weather; an automatic sensing system tells the operator when the engine is ready to start
  • Mechanical fuel bleed eliminates the need for tools and fuel leaking onto the ground when bleeding the fuel system:
    • Simply pump the fuel pump that is located on the side of the engine
  • Electric fuel shutoff eliminates the need for a separate kill switch
  • Indirect injection with pre-combustion chambers provide smooth, quiet operation
  • Engine-mounted 40-amp alternator supplies regulated charge to the battery for fast recharge:
    •  Also provides plenty of power for 12-volt-powered attachments and accessories
  • Low exhaust emissions are certified to meet U.S. Environmental Protection Agency (EPA) and state of California standards for cleaner air:
    • Overhead valve design for efficient airflow
    • Swirl chamber combustion design for efficient combustion
    • Liquid cooled for more consistent operating temperatures
    • Closed crankcase ventilation recirculates and burns crankcase hydrocarbons

Power

Maximum torque

Cooling

Displacement

17.9 kW (24 hp)

Liquid

993 cc (60.6 cu in.)

Air-intake system
Air intake screens on hood and pedestal Air intake screens on hood and pedestal
Radiator screen pulled out for cleaning Radiator screen pulled out for cleaning

Engine intake air is drawn in through screened panels at the base of the pedestal and on the right and left sides of the tractor:

  • Cleanest and coolest area of the tractor
  • Pre-cleans the air to keep large chaff and debris from entering the radiator or air cleaner
  • Easy to clean and service so engine operates at optimum temperature
Diesel engine air cleaner Diesel engine air cleaner
Replaceable air filter Replaceable air filter

The diesel engine uses a heavy-duty cyclonic canister-type replaceable air filter:

  • Completely sealed for effective cleaning
  • Cyclone action that is designed to eject 90 percent to 95 percent of the dirt before it reaches the paper element
  • Secondary safety element that provides additional filtering
  • Total effective filter area of 3303 cm2 (512 sq in.)
Air filter restriction indicator Air filter restriction indicator

An air filter restriction indicator is standard equipment:

  • Indicator light on the dash alerts the operator when the air filter is dirty and needs to be replaced
  • With a visual check, air filter daily service is simplified
  • Indicator extends the engine life by eliminating inadvertent dirt entry into the engine from over-servicing of the air filter
Fuel tank has a large 19.7-L (5.2-U.S. gal.) capacity
Fuel cap and tank (shown on X758 Diesel Tractor) Fuel cap and tank (shown on X758 Diesel Tractor)
Fuel filter, separator, and shutoff Fuel filter, separator, and shutoff

A large, 19.7-L (5.2-U.S. gal.) capacity fuel tank holds enough fuel for extended operation between refills:

  • Fuel-fill location is on the left fender for easy access, increased safety, fewer spills, and convenience during filling.
  • A fuel filter/separator with replaceable element includes a shutoff valve and is conveniently located on the front of the engine.
Battery and alternator are large capacity
Battery located at front of tractor frame Battery located at front of tractor frame

A high-capacity, regulated alternator charging system provides plenty of power to quickly recharge the battery and run electrical equipment, such as lights or a sprayer:

  • 40-amp alternator is provided as standard equipment on diesel engines.

A large-capacity, 500 cold-cranking amp battery provides plenty of cranking power for quick, sure starts in cold weather:

  • Mounted at the front of the tractor frame for easy accessibility




X739 Tractor mowing with 137-cm (54-in.) HC Mower Deck X739 Tractor mowing with 137-cm (54-in.) HC Mower Deck
Side view of mower deck Side view of mower deck

A deep-deck design of 14 cm (5.5 in.) delivers excellent airflow so material can be processed quickly and efficiently. The deck is stamped from 9-gauge, 3.8-mm (0.15-in.) steel and has welded-on reinforcement at the bottom edge for extra strength and durability.

152-cm (60-in.) HC Mower Deck top view 152-cm (60-in.) HC Mower Deck top view
137-cm (54-in.) HC Mower Deck bottom view 137-cm (54-in.) HC Mower Deck bottom view

High-capacity mower decks are formed in a hydraulic press to minimize the number of welds and provide a smooth underside for reduced material buildup:

  • Wider and higher discharge opening provides an even clipping dispersal for an excellent finished appearance in all conditions.
  • Durable plastic deflector spreads grass clippings evenly across the lawn, is hinged, and can be raised to minimize the storage space required. 
  • 2.5-cm (1-in.) cold-forged spindles are heat-treated for strength and supported by ball bearings.
  • Front edge is raised above the blade plane to allow even cutting of tall grass.
  • Blade overlap is greater than many conventional decks for a clean cut.
  • Mower can side-discharge, mulch (optional), or use a Power Flow™ collection system (optional).
Tire-grab feature and shark tooth shaped grips Tire-grab feature and shark tooth shaped grips
Drive-over ramp removed for spindle access Drive-over ramp removed for spindle access

Ramps are provided to permit driving over the mower deck for installing and removing it from the tractor:

  • Constructed of 30 percent glass-filled polypropylene for strength to carry the weight of the tractor
  • Polypropylene material will not rust or corrode for lasting good appearance
  • Shark tooth shaped grips designed into the ramp inclines for added wheel traction when driving onto the mower deck
  • Tire grab at the rear of the ramp gives extra wheel traction
  • Ramps removed and replaced without tools to permit convenient servicing of the mower spindles
Mower wash port Mower wash port
Mower wash port with hose connector Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy: 

  • Hose connector is included with the mower deck.

Optional high-performance mulching attachment

Mulching attachment components (48 HC shown) Mulching attachment components (48 HC shown)

The high-performance mulching attachment provides excellent mulching performance:

  • This is a high-performance mulching attachment that includes formed steel baffles to control the material and special mulching blades for superior performance.
    • The special mulching blades that are included can also be used for side discharging and collecting, though overall performance may be slightly less than with the standard blades.
  • Order: BM23977, 54 HC mulching attachment  or BM23978 60 HC mulching attachment

 

Optional MulchControl™ attachment

Optional AutoConnect™ drive (BM25677)
X758 Tractor driving onto high-capacity mower deck X758 Tractor driving onto high-capacity mower deck
AutoConnect option installed on X758 Tractor AutoConnect option installed on X758 Tractor

The AutoConnect driveshaft is an optional kit that will automatically connect or remove the drive from the mower deck to the tractor’s mid power take-off (PTO) shaft.

 

The AutoConnect drive does not need to be removed from the tractor when using front-powered equipment.

 

MulchControl with baffle closed MulchControl with baffle closed
MulchControl with baffle open MulchControl with baffle open

The MulchControl attachment makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
  • The left mower blade area is completely enclosed and optimized for mulching, thus will mulch even when the mower is in the side-discharge mode.
  • Baffles around the center and right blades are optimized for mulching when the discharge baffle is closed.
MulchControl operation
MulchControl handle (standard with MulchControl) MulchControl handle (standard with MulchControl)
Hydraulic MulchControl actuator option Hydraulic MulchControl actuator option

The optional MulchControl attachment comes with a handle on top of the mower deck that is used to open and close the discharge baffle:

  • The operator is required to get off the machine in order to engage or disengage mulch mode.

An optional hydraulic MulchControl actuator attachment is available to replace the standard control lever and allow the operator to control MulchControl from the seat using the tractor’s hydraulic control lever.

NOTE: To have hydraulic control of the MulchControl baffle, both MulchControl and hydraulic MulchControl actuator attachments must be ordered. The hydraulic MulchControl actuator is an extra-cost option for the MulchControl attachment.

Changing from mulching to side discharge or vice versa with the hand lever or hydraulic MulchControl actuator option takes only a few seconds.

 

MulchControl is well-suited to the following mowing situations:

  • Usually mulch, but side discharge when grass gets too long
  • Usually side discharge, but would like to be able to close the chute to control clippings
  • Always mulch a main lawn, but often side discharge secondary lawns
  • Bag clippings, but want to go farther before emptying bags

MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side-discharge or bagging when needed.

MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one-third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired

MulchControl compatibility

MulchControl is a field-installed attachment. Mulching blades are included:

  • MulchControl is for 2015 and newer X700 Signature Series Tractor and:
    • 9074M 137-cm (54-in.) HC Mower Deck (serial number 030,001-070,000)
    • 9078M 137-cm (54-in.) HC Mower Deck (serial number 070,001-)
    • 9075M 152-cm (60-in.) HC Mower Deck (serial number 030,001-070,000)
    • 9079M 152-cm (60-in.) HC Mower Deck (serial number 070,001-)
  • Optional hydraulic MulchControl actuator (BUC10536) is available for model year 2019 and newer mower decks (9078M and 9079M) only. In addition, mower must be equipped with the basic MulchControl attachment.

NOTE: The hydraulic MulchControl actuator is not available for the 122-cm (48-in.) Accel Deep™ Mower Deck.

Order:

BM26300 MulchControl attachment (54 HC)

BM25258 MulchControl attachment (60 HC)

BUC10536 Hydraulic MulchControl actuator

Mower deck attachability
X758 Tractor driving onto high-capacity mower deck X758 Tractor driving onto high-capacity mower deck

High-capacity mower decks have ramps positioned on top of the deck for easy installation:

  • On a four-wheel drive (4WD) tractor, the operator can simply drive onto and over the deck.
  • On a two-wheel drive (2WD) tractor, the operator must back onto and over the deck.

To remove the mower deck:

  • Disconnect the drive shaft.
  • Unlock the draft arm locks.
  • Back or drive the tractor onto and off the mower deck. 
    • On a 4WD tractor, the operator can simply back onto and off the deck.
    • On a 2WD tractor, the operator can simply drive forward onto and off the deck.

Drive-over mower quick reference (major steps)

John Deere has designed a system that makes it easy to remove and reinstall the mower deck. A few steps need to be followed carefully to ensure success.
 
The list below includes the major steps. Refer to the operator’s manual for a more detailed procedure. The tractor most likely has the mower already installed, so these steps begin with the removal procedure.

DRIVEJD – Always Dependable Product

 

                                                                 Mower removal steps

Drive tractor to level area.

 

Ready mower deck.

  • Adjust wheels and lower mower deck
  • Draft arms removed (front) and released (rear)
  • Power take-off (PTO): disconnect if manual PTO-connect system, then back up to clear rear draft arms (if equipped with AutoConnect™, backing up also disconnects the PTO)
    • Raise rear draft arms

 Increase engine speed, engage traction assist, and drive over.

 

                                                                 Mower installation steps

Verify tractor and mower are ready.

  • Alignment of tractor and mower deck
  • Draft arms up
  • PTO in correct position (If manual PTO connect, place shaft in mower hanger)

 Engage traction assist, increase engine speed, and drive or back over.

 

Join mower to tractor.

  • Alignment and attachment verified and PTO connected
  • Draft arms hookup, front
  • Position mower wheels

Done! Set mower deck height and mow.





An exclusive 4-year or 700-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X700 Series Tractors.

  • The warranty is hassle free, with one company handling all the paperwork.
  • Premium features of X700 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See Agriculture and Turf equipment Warranty Statement.at JohnDeere.com.au for details.





Twin Touch foot control Twin Touch foot control
Cruise control Cruise control

Twin Touch foot pedals control the speed and direction of travel:

  • Automotive-type accelerator control for easy operation
  • Twin Touch design that allows operator to change direction without lifting foot off platform
  • Large pedal surface for increased operator comfort

When the master brake pedal is depressed, the power take-off (PTO) and cruise control disengage.

Cruise control is standard equipment:

  • To engage, push in on the cruise lever and hold until the foot is removed from the forward pedal.
  • For emergency stop, the cruise control can be released by pushing on the master brake pedal or pushing down on the forward pedal.
Heavy-duty two-wheel steer or four-wheel steer transaxle
X739 four-wheel steer transaxle X739 four-wheel steer transaxle

A rugged, heavy-duty commercial hydrostatic transaxle handles a wide variety of ground-engaging applications and commercial mowing usage. A hitch for tow-behind equipment is included. The tractor frame extends behind the transaxle to provide mounting points for the category 1 3-point hitch and Click-N-Go™ mounting brackets.

Many quality features are provided:

  • Universal joint splined drive shaft between the engine and transmission is durable and gives efficient power transfer (no belts, no slippage, no power loss).
  • Shaft drive output through continuous live transmission PTO has no belts to slip or wear out.
  • Internal hydraulic PTO with multi-disk clutch pack:
    • Soft, smooth clutch engagement
    • Long disk life with continuous oil bath
    • No service required, as disks are self-adjusting
  • Internal, wet-disk brakes:
    • Isolated from dirt, rust, ice, or other contaminants for effective brake operation
    • Constantly cooled by transmission fluid to minimize wear and eliminate loss of brakes from overheating
  • Quiet design virtually eliminates hydrostatic whine.
  • Large, efficient 8-cc charge pump produces excellent flow and pressure to allow operating a variety of hydraulic powered equipment.
  • Externally mounted, oil-filled shock absorber in the transmission control system ensures smooth starts and stops.
  • Exceptional strength and durability:
    • Automotive-type forged flanged axles
    • Cast-iron axle housings
    • Uses an axial piston-type hydrostatic pump and motor versus less-efficient ball-type rotating groups
Two-wheel steer hydrostatic transaxle Two-wheel steer hydrostatic transaxle
Four-wheel steer hydrostatic transaxle Four-wheel steer hydrostatic transaxle

Two-wheel drive (2WD) and 4WD tractors use similar transaxles, however, four-wheel steer tractors have additional features that allow the rear wheels to turn.

 Differential lock control Differential lock control

Infinite control of ground speed and smooth change of direction provide efficiency and operator convenience. The differential lock provides positive power to both drive wheels for increased traction. It can be engaged by the operator as needed.

Forward 0 to 8.5 mph (0 to 13.7 km/h)
Reverse 0 to 6 mph (0 to 9.7 km/h)
Transmission oil cooler

The transmission oil cooler is standard equipment:

  • Helps keep oil temperatures cooler during high draft load operations
  • Separate automotive-style cooler that provides increased capacity for the oil cooler as well as the radiator, when compared to an oil cooler internal to the radiator
Full-time 4WD for superior traction
X739 Tractor mowing X739 Tractor mowing
Full-time 4WD front axle Full-time 4WD front axle

The full-time 4WD front axle provides a superior combination of traction and maneuverability. When the tractor is in a turn, the front wheels need to rotate faster because of the larger arc, compared to the rear wheels, they are traveling in. The hydrostatic front-wheel motors automatically increase the average travel speed of the front wheels when the tractor is in a turn.

The full-time 4WD system optimizes steering performance to provide maneuverability and trimming ability comparable to that of 2WD models, turning radius of 25 in. (63.5 cm) for two-wheel steer models and 21 in. (53.3 cm) for four- wheel steer models, with the added benefit of four-wheel traction.

Full-time 4WD front-wheel motors are powered by the same pressurized hydraulic fluid that powers the rear transaxle drive motor:

  • Hydraulic lines move the pressurized fluid from the rear axle to the front-wheel drive motors, located near the center of the front axle, after the oil has passed through the rear transaxle drive motor.
  • The two front wheel motors receive fluid in parallel so each gets the amount of fluid needed to enable different speeds during turns, similar to a differential assembly, and allow smooth turns.
  • Turning radius of tractors with full-time 4WD is the same as for 2WD models, and considerably less than the turning radius for tractors with mechanical 4WD.
  • Full-time 4WD functions in forward and reverse.
Control arm increases front-wheel speed in turns Control arm increases front-wheel speed in turns
Front-wheel drop-axle Front-wheel drop-axle
  • A control rod (looks similar to a steering drag link) adjusts the swash plate of the variable-speed wheel motors, so each wheel motor is operated at the optimum speed during turns to minimize tire scuffing and assist in making tight turns.
  • Front-wheel drop-axles provide extra-tight steering capability, improved ground clearance, and include speed-reduction gearing.